FlatECUScan DIAGNOSTIC SYSTEM
Diagnostic Cable / Function Cable
AND Diagnostic Software

Product Description

German / English / france /  Italian /  spanish /  Greek /  中文簡體

Working Included FIAT 500 ALL Model and FIAT 500 ABARTH 
　

Introduction: 
Three ODB cable adapters plus an ELM 327 v1.4 ODB2 USB Diagnostic Lead to allow additional diagnostic options for Italian cars. These can include ENIGINE, ABS, POWER STEERING and CAN ECU's (an additional KKL VAG COM may be required to connect to specific ECUs, [depending on car model]). 

Specification: 
Green Adaptor Lead (FiatEcuScan Adaptor 1) = Engine, ABS, Power Steering 
Red Adaptor Lead (FiatEcuScan Adaptor 2) = Airbag 
Yellow Adaptor Lead (FiatEcuScan Adaptor 3) = CAN 
16 Pin ODB2 USB Diagnostic Lead ELM 327 v1.4 

Pin Configurations: 
Green Adaptor Lead = Female pin 7 to male pins 1,7,9,12. 
Red Adaptor Lead = Female pin 7 to male pin 3 
Yellow Adaptor Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12 

Modified EML:
* Please note that this ELM 327 HAS been modified to resolve the connection problems reported on the home page of FiatECUScan

 
Additional Items Required: 
FiatEcuScan software ( full version ).  

Supported Vehicles: 
Please see the FiatEcuScan website for a full list of supported vehicles. 

Other Details: 
Cables fully tested on supported model before shipping. 
No responsibility can be accepted for any damage caused by the lead. 
Some models may require the full version of FiatEcuScan to communicate with some ECUs.